Bolt-On Track Pads
Designed for steel track shoes with compatible mounting holes. Confirm the track width, hole quantity, hole diameter and centre-to-centre spacing before ordering.
Shop bolt-on track pads
Polyurethane track pad guide
Polyurethane Track Pads for Excavators
Compare polyurethane and rubber track pads, choose bolt-on or clip-on mounting, and confirm the correct width from 230mm to 800mm.
- 230mm-800mm widths
- Bolt-on and clip-on mounting
- Wear-resistant polyurethane track pads
15%
OFF STOREWIDE
Starting today
EXCAVATOR TRACK PAD GUIDE
Choose the Right Polyurethane Track Pad
VectorMax track pads create a replaceable contact surface between a steel undercarriage and the ground. Buyers often search for rubber track pads or rubber pads for excavators; our range uses wear-resistant polyurethane with steel reinforcement for demanding work on asphalt, concrete, paving and prepared surfaces.
Clip-On Track Pads
Available in standard and single-side configurations for compatible grouser profiles. Confirm shoe width, grouser height and mounting clearance.
Shop clip-on track pads230–800mmAvailable track widths
2 stylesBolt-on and clip-on
15+ yearsManufacturing experience
Fitment checkBefore shipment
Information needed for fitment
- Machine brand, exact model and operating weight
- Steel track-shoe width measured in millimetres
- Mounting-hole pattern or grouser profile
- Clear photographs of the top and underside
- Required quantity or pads per machine
Use the excavator track pad measurement guide before ordering. Dimensions can vary even between machines with the same model name.
Common applications
Polyurethane excavator pads are commonly used by contractors, rental fleets, repair shops and equipment dealers when steel-tracked machines need to travel or work on hard, finished or surface-sensitive jobsites.
Actual wear life depends on machine weight, installation, ground conditions, travel speed and maintenance. Inspect pads and mounting hardware regularly and replace loose or damaged parts promptly.
NEED HELP CHOOSING?
Send your machine details and track measurements.
Why VectorMax
Built for Steel-Tracked Equipment
Performance depends on correct fitment, machine weight, surface, operation and maintenance.
Wear-resistant polyurethane
Designed for repeated contact on asphalt, concrete, paving and demanding construction surfaces.
Impact absorption
Helps cushion contact between the steel track shoe and hard ground to reduce vibration and operating noise.
Surface protection
Creates a replaceable contact layer that helps limit direct steel-track marking on finished surfaces.
Factory-direct supply
Available for single replacements, complete machine sets, dealer stock and mixed-model fleet orders.
Material comparison
Polyurethane Versus Standard Rubber
Material performance varies by compound, machine load, jobsite surface and maintenance.
Performance factorPolyurethaneStandard rubber
Abrasion resistanceHighStandard
Compression strengthHighCompound dependent
Steel reinforcementIntegratedProduct dependent
Width range230mm-800mmVaries by supplier
Ready to confirm fitment?